512-778-5232

Split and Sawn Cladding

American Limestone Company has recently developed the mechanized fabrication of panels 3-5/8” thick, either split on one side and sawn on the other, or sawn on both sides*. These panels are available for use with conventional mounting methods.

Our 2” split panels are designed for use with the ALC Solution Installation System. They may be combined with brick or our standard 1” panels by employing extended anchors to bring the different elements flush with one another.

Standard 3 5/8” Cladding

Available Stones: Cotswold
 Burnished Silver
 
Available Surfaces: Split (-S-3 5/8)
 Sawn (-SN-3 5/8)
 
Inches
 
 H L Bed Sq. Ft. Weight per stone
 Face Area + (lbs.) +
90* 3 3/4 23 3/4 3 5/8 0.67 25
91* 7 3/4 23 3/4 3 5/8 1.33 53
10111 3/423 3/43 5/82.0083
13015 3/431 3/43 5/83.60149
15115 3/415 3/43 5/81.7874
16023 3/423 3/43 5/84.00169

* 90, 91 are split front and back
+ to be verified



Standard 2" Split Cladding
for use with ALC Solution Installation System

Available Stones: Cotswold
 Burnished Silver
 
Available Surfaces: Split
 Sawn (-SN-3 5/8)
 
Inches
 
 H L Bed Sq. Ft. Weight per stone
 Face Area + (lbs.) +
101-S 11 3/4 23 3/4 2 2.00 24
150-S 15 3/4 31 3/4 2 3.60 43
151-S 15 3/4 15 3/4 2 1.78 21

Custom sizes are available
Panels also available in other finishes


Split.wall.jpg

About | ALC Solution | Site Map
T: 512-778-5232    |   F: 512-778-5213   |   1095 Highway 183 North, Liberty Hill, TX 78642   |   


Join the American Limestone Company mailing list?
Email:
Copyright © 2000-2006 American Limestone Company